Dms Machining & Fabrication Safety Record
DOT# 853847 · Barre, VT 05641 · 8024791088
Legal name: Gloucester Associates INC
Good safety record — scored 30/100. Below-average out-of-service rates and few crashes.
Last inspected 01/08/2026
Safety Score Breakdown · 30/100 points
Lower scores are better. How is this calculated?
According to FMCSA records, Dms Machining & Fabrication (DOT# 853847) in Barre, Vermont has 6 inspections on record with 5 violations and a 16.7% vehicle out-of-service rate. Safety grade: B.
Out-of-Service Rates vs. National Average
An out-of-service (OOS) violation means a vehicle or driver was found unsafe to operate during a roadside inspection and was prohibited from continuing until the issue was corrected.
Violation Categories · 5 total violations
FMCSA groups violations into Behavioral Analysis and Safety Improvement Categories (BASICs). Each violation found during a roadside inspection is classified into a category that reflects the type of safety risk.
Inspection History · 6 records
FMCSA inspections range from Level 1 (full vehicle and driver examination) to Level 6 (enhanced motorcoach inspection). Level 1 is the most thorough; Levels 2 and 3 are walk-around and driver-only checks.
| Date | State | Veh OOS | Drv OOS |
|---|---|---|---|
| 01/08/2026 | VT | 0 | 0 |
| 11/03/2025 | VT | 0 | 1 |
| 11/03/2025 | VT | 0 | 1 |
| 10/27/2025 | VT | 1 | 0 |
| 07/22/2025 | VT | 0 | 0 |
| 01/03/2025 | NH | 0 | 0 |
Fleet Profile
Power units include trucks, tractors, and other commercial motor vehicles registered to the carrier. Driver count reflects the total number of drivers reported on the carrier's MCS-150 filing.